Extra Fluoro

High porosity rate PTFE membrane makes Extra Fluoro series filter cartridges for high flow rates and excellent retention performance. The cartridge realizes an extra high flow rate due to large surface area of the filter.
These filter cartridges utilize a PTFE membrane with 100% polypropylene support and porous outside/inside cage, thereby good chemicals compatibility. Filter cartridges are using the welding techniques and manufactured in cleaning room enable the smallest contaminant extraction and higher durability.

• Strengthening inner core make for good pressure
  resistance
• High flow rate: these filter can handle flow rates up to 200 lpm
• The high porosity rate structure makes long service life
• No extractable, ensure superior downstream
  cleanliness
• PTFE membrane offers excellent chemical
  resistance in aggressive chemical applications

Maximum operating forward pressure drop:

• 0.85 MPa @20°C/120 psid @ 68°F
• 0.34 MPa @85°C/50 psid@ 185°F

Maximum operating temperature:
85°C/175°F

• TFT-LCD: wet etching and stripping process
• TN/STN: wet etching and stripping process
• Electronic grade solvents
• Magnetic media solvent

Micron Rating:
0.05,0.1, 0.2, 0.45, 1,3,5,10μm

Material of Construction:
Medium: High porosity rate PTFE membrane
Core, cage and endcaps : Polypropylene
Support and drainage: Polypropylene
Length: 10, 20 inches
Outer Diameter: 130mm
Inner Diameter: 51mm

Flow Rate VS Pressure Drop