Description
The High Capacity Pleated Filter is designed to fit inside existing baskets without hardware changes. It provides higher filter surface area and dirt holding capacity. The inside-out flow holds contaminant within the filter High Capacity Pleated Filter holds several times than the typical 500 series bag.
Download BrochureFeatures
- High surface area, high flow capacity
- Inside to outside flow configuration all
contaminants held within the single ended filter - Shorter in down time easy to change out
- Available to fit most Size 1 and Size 2 bag housing with no hardware changes
- All polypropylene construction provides wide
chemical compatibility - Cartridges are free of surfactants, resins, binder
and adhesive
Operating Conditions
Maximum operating forward pressure drop:
5.1bar (75 psi) at 25°C (77°F)
Maximum operating temperature: 80°C (176°F)
Applications of Product
- RO Pre-Filtration
- Cooling water filtration
- Pre filters or Final filters for waste water
- Food and Beverage filtration
- Oil Filtration
Spesification
Micron Rating: Absolute rating 1, 5,10, 25,50,75 μm
Material of Construction:
- Filter Medium: Pleated Polypropylene depth structure
- Support and drainage: Polypropylene
- Inner core: Polypropylene
- End caps: Polypropylene
- Outer Diameter: 152.4mm (6 inches)
- Outer Flange Diameter: 184mm (7.24inches),
equal to Size 1/Size 2 Bags - Length: Standard Size 1, Standard Size 2
- O-Ring : EPDM(Standard), Viton, Silicone, PFA
encapsulated Viton
Performance
Pressure Drop & Retention Rate
| Micro Rating (μm) | Efficiency (μm) | Pressure Drop | ||||
| 90% | 99.98% | (mbar/m3/h) / (psid/gpm) | ||||
| Size #1 | Size #2 | |||||
| C10 | 0.5 | 1.2 | 13.683 | 0.032 | 6.267 | 0.022 |
| C50 | 2 | 5 | 1.817 | 0.006 | 2.8 | 0.008 |
| D10 | 4.5 | 10 | 0.9 | 0.003 | 1.033 | 0.004 |
| D25 | 16 | 25 | 0.6 | 0.002 | 0.467 | 0.002 |
| D50 | 38 | 50 | <0.3 | <0.001 | 0.3 | 0.001 |
| D75 | 65 | 75 | <0.3 | <0.001 | <0.3 | <0.001 |
Code Principle
