Micro Clean

Micro Clean Filter employ a Melt-Blown pp micro
filber with 100% polypropylene support and porous
outside/inside cage . The Micro Clean Filter provides superior flow rates and dirty holding capacity due to the multiple layered construction . Filter cartridges are using the welding techniques and manufactured in cleaning room enable the smallest contaminant extraction and higher durability.

• All polypropylene media and construction meet a
  broad range of performance requirements
• High contaminant holding capacity
• No extractable, ensure superior downstream
  cleanliness.
• Superior retention of colloids and particles ensure low particle counts to protect your process
• Fits most available housings

Maximum operating temperature:

• 95°C/203°F

Maximum operating forward pressure drop:

• 2.81kg/cm² (40 psi) at 82°C(180°F)
• 5.62kg/cm² (80 psi) at 24°C(75°F)

• TFT-LCD: wet etching, stripping, developer, cleaning
• TN/STN: wet etching, stripping, developer, cleaning
• Color Filter: wet etching, stripping, developer, cleaning
• Beverage/Wine clarification
• RO/DI Pre-filtration

Micron Rating:

• 0.2μm, 0.45μm, 1μm(plus: absolute)
• 2.5μm, 5μm, 10μm, 20μm, 40μm, 70μm(absolute)

Material of Construction:

• Medium: Melt-Blown PP micro filber
• Core, cage and endcaps: Polypropylene
• Support and drainage: Polypropylene
• Length: 10~40 inches
• Outer Diameter : 69mm
• Inner Diameter : 28mm

Flow Rate VS Pressure Drop