Genesys SI

Description

Genesys SI has been developed as an antifoulant for use in Reverse Osmosis and Nano-filtration systems operating on high silica feed waters.

Genesys SI is also effective against all common scale forming salts such as calcium carbonate, calcium, barium and strontium sulphate. By reducing silica fouling and inhibiting all forms of scaling, Genesys SI allows OEMS to design systems that can operate at higher recovery rates, reducing the amount of feed water used and the volume of concentrate to be discharged.

Consequently, significant savings can be made in capital and operational costs.

Application

Genesys SI should be dosed continuously to the feed water upstream of the cartridge filters.

Typical dosage rates are 2-5mg/l. Under NSF listing the Genesys SI dose rate in the feed water should be less than 5mg/l in potable water systems.

The optimum dosage rate can be calculated using the Genesys Membrane Master® software. Genesys SI can be diluted and is fully miscible with water in all proportions.

Health and Safety

Genesys SI is a non-hazardous, synergistic blend of inhibitors based on neutralised carboxylic and phosphonic acids. Genesys SI is not aggressive to carbon steel and other commonly used materials of construction. Observe all safety precautions shown in the material safety data sheet, available on request.

Packaging

Available in 25 kg kegs, 240 kg drums and 1,200 kg IBCs. Shelf life is 2 years under normal conditions of storage.

Typical properties
  • Appearance: pale amber liquid
  • pH as supplied: 9.8 – 10.2
  • Specific gravity: 1.13 – 1.17
  • Freezing point: - 4ºC
Download Brochure